Work Wear & Safety Foot Wear available from Clampco
Published on 16 April 2012.
Did you know that Work & Safety Wear was available from Clampco?
Priced competitevly Clampco offer a full range of Work Wear ranging from Hi-Viz Jackets through to Steel Toe Capped Safety Trainers…………..
Latest Volvo Exhaust Bracket Now Available!
Published on 21 March 2012.
Clampco are pleased to now offer the latest Volvo Exhaust Centre Mounting Bracket…………….
Exciting New Product Available from Clampco……………..
Published on 12 March 2012.
Clampco have added a Universal Boot & Seal Kit to the range……. Suitable for Track Rod Ends, Drag Link Ends, Link Bars & Tie Rod Ends……….
Clampco add Workshop Signs to the range……….
Published on 14 February 2012.
Clampco have now added a variety of workshop signs to the ever expanding product range. To see the selection of Signs available then please request a copy of our 2012 edition Clampco catalogue if you haven’t seen a copy already……..
Ultra Low Profile Omega Trolley Jacks now in stock!
Published on 27 January 2012.
Clampco are now stockists of the latest Ultra Low Profile Trolley Jacks by Omega Lift Equipment. Check out below for more information on the ultimate in vehicle lifting equipment & our superb introductory special offer prices!
This is the lowest Profile Jack available on market today going down to a minimum height of just 63mm!
Sealey GA70 Wheel Alignment Equipment
Published on 09 December 2011.
As you are probably aware, Clampco have access to the full range of Sealey Tools & as one of the largest Sealey stockists in the UK of Sealey Tools we are always at the forefront in showcasing the latest Sealey products. This month we are promoting the impressive new Sealey GA70 Wheel Alignment Equipment that has just been added to the range. Throughout December Clampco are offering this at a crazy price of just £999 & we are also throwing in a FREE 1/2″ Cordless Impact Wrench worth £199.95!
- Fast, simple and accurate alignment of both front and rear wheels.
- Optimises vehicle performance and set up after installation or modification of steering or suspension components.
- Simple and fast to use, it is ideal for the busy professional workshop and has a fast return on investment – potentially adding value to every steering or suspension job.
- This fully portable kit is also ideal for track-day set up for the enthusiast.
- Works on practically all cars and light commercials with rim diameters between 330mm(13″) and 560mm(22″).
- Supplied with steering wheel clamp, wheel turn plates and wheeled storage rack.
- Supplied with comprehensive operating instructions.
Contents: Portable Mounting Storage Rack with Castor Wheels, 2 x Laser Alignment Heads, 2 x Wheel Alignment Hangers, 2 x Dished Turning Plates, 1 x Steering Wheel Clamp, 4 x 13″ Wheel Rim Spacers
Enquire with us today for more information
Clampco now a Chicago Pneumatic Distributor
Published on 02 October 2011.
Clampco are pleased to announce the arrival of another big name into their ever growing product range….. Chicago Pneumatic. 
Chicago Pneumatic Air Tools are well known for being a “Top end” Air Tool with years of history & being a worldwide market leader in Automotive & Industrial markets. Over the years CP’s products have been further developed & improved but they have also now been made more affordable which makes them more accessible in terms of cost to the mass market.
Clampco launched the CP range on October 1st 2011 with some super low introductory prices on the some of the more popular Air Impact Wrenches available including 1/2″ & 1″ Square Drive models.
About Chicago Pneumatic……
Founded over 100 years ago by a guy who saw a need to fill, Chicago Pneumatic has a strong history of constantly looking for new ways to meet your needs, today and tomorrow.
Way back in 1889 John W. Duntley realized that construction workers in particular had a need for many tools that weren’t yet available. He founded Chicago Pneumatic Tool Company and set out on a lifelong mission to provide all types of industries and companies the tools necessary for their success.
Over the years Duntley grew the company through product innovation, always insisting on product quality and reliability. The name Chicago Pneumatic became known and appreciated by workers around the world for durable, reliable tools that made tough jobs easier and were designed to meet specific needs.
Today, Chicago Pneumatic is a global brand that offers tools for almost every industry and countless applications. And we’re proud to say Chicago Pneumatic still stands for reliability, durability and customer value.
Worldwide leading manufacturer of impact wrenches, CP designs tools to maximize productivity and improve operator comfort.
The use of the latest technologies and materials, such as composite housing or steel housing for the toughest materials, makes CP Industrial impacts the best in each class. Our versatile line features different clutches such as rocking dog, 2 jaw, pin, single dog or twin dog clutches.
Follow the link for access to the latest Chicago Pneumatic special offer available from Clampco……. CHICAGO PNEUMATIC 2011 SPECIAL OFFER
PCL Nitrogen Tyre Inflator & Generator
Published on 20 September 2011.
Clampco are distributors for the well known UK based manufacturer PCL. PCL recently launched the Nitrogen Generator with built in Tyre Inflator. This relatively new technology will be at the forefront of the Automotive industry in the near future with large garage chains such as ATS Euromaster now having them installed throughout the UK. 
PCL’s N2 Generator and Inflator – combining the latest in high performance nitrogen generation with leading inflation technology.
PCL introduces a range of products designed for the inflation of tyres with nitrogen. This makes available for the first time cost effective N2 delivery with market leading tyre inflation technology. To the tyre service company, the biggest benefit is that the cost effective PCL unit provides an excellent revenue opportunity while removing the need to buy, store and handle bottles. The chief benefits for the tyre customer are that – due to nitrogen’s properties compared to air – it can offer enhanced handling, improved fuel efficiency, extended tyre life, and most importantly, increased safety, which is why it is used in Formula One.
PCL is introducing two units to its range the PCL N2 Generator and the PCL N2 Inflator. The PCL N2 Generator brings the latest in PSA nitrogen generation to a robust, cost effective and mobile design capable of delivering high levels of nitrogen to which can be added PCL’s leading tyre inflation products. The PCL N2 Inflator takes all the advantages of the PCL N2 Generator and adds to this the latest in PCL’s market leading inflation technology developed to deliver N2 inflation cost effectively.
The PCL N2 Inflator incorporates the ability to preset the tyre pressure allowing the operator to automatically inflate a car tyre to the level required. It is so reliable and accurate that it enables the operator to securely continue with alternative work whilst the unit is inflating up to 4 tyres with N2 saving time and money. Using proprietary software with bespoke purging and flat tyre detection the inflator can also cost effectively convert a car from air to nitrogen to give consistent provision of the 95% plus purity in the tyre required to deliver the maximum nitrogen benefits based on 97- 98% plus purity delivery.
Key Product Benefits
- Revenue generation for Tyre Service Providers
- Both N2 fill and Air to N2 conversion service for up to 4 tyres
- Cost effective to use
- Simple to set up
- Low life time costs – with high grade filtration and high performance components
- Guaranteed accuracy and robustness with ceramic pressure sensor
Key Product Features
- Rugged and reliable design
- Mobile to allow efficient and flexible positioning and usage
- N2 purity check point
- Can be fitted to meet EC standards
- Easy to operate and quick installation
- Strong support
- Tank contents gauge
- Electronic preset tyre inflation
- Auto-start inflation
- Digital display
- Up to 4 tyres at once
- Automatic flat tyre detection
1 purge inflation cycle from flat
2 purge inflation cycle, as standard - Software programme for conversions of up to 4 tyres from air to nitrogen
- Bespoke software for optimal nitrogen inflation with purge cycle
- Ceramic sensor – accuracy up to ± 0.5% of full scale reading
Specifications
Accuracy: To +/- 0.5% of full scale reading
Reading Accuracy: 0.1bar / 1psi / 5kPa
Max Inlet Pressure: 10bar / 145psi / 999kPa
Max Inflation Pressure: 5.5bar
N2 flow: 60l/min @ 8bar supply
Approvals
Exceeds EC Directive 86/217
The cost savings for the consumer can be great with using Nitrogen instead of standard Air. Using Nitrogen keeps Tyre Inflated for longer thus saving significant money on wasted fuel due to under inflated tyres over a period of time. A garage can expect to charge around £1.50 per tyre inflated with Nitrogen & thus prooving a real revenue generator!
